News >> Floor can also add electric film home warmer
Decoration of their own house, but is now getting higher and higher, do not know of a product to make our home warm in the winter and no security risks, and now I tell you now whether imported floor, or domestically floorup to standard as long as the quality of imported floor to meet European Enpr13329 standard domestic quality of the floor up to the national GB/T1802-2000 standard, and basically did what's the problem.
It should be noted that generally speaking, the floor should be thin not thick, good environmental performance, good heat resistance principle. To warm the very high requirements for wood flooring, improper selection will directly affect the heating effect, mainly several problems:
First: substrate density, internal bond strength is good;
Second: thickness swelling is less than or equal to 2.5%;
Third: formaldehyde emission to be as low as possible.
Fourth: The thermal conductivity is essential.
Many different types of flooring on the market now, more suitable for solid wood flooring, laminate flooring and other flooring used to heat the floor. Because geothermal floor standard thickness of 6.5 ~ 8.5mm, most of the flooring thickness 6 ~ 9mm, laminate flooring and more for 6 to 8 mm, three parquet 8 ~~ 9mm, better heat transfer performance, and the surface layer of aluminum oxide wear layer, the wear layer is conducive to the rapid diffusion of the heat on the surface.
In winter day, came home do not have to worry about at home was cold, the children play on the ground will freeze, this is better than the air conditioning effect, let us warm into millions of households.
It should be noted that generally speaking, the floor should be thin not thick, good environmental performance, good heat resistance principle. To warm the very high requirements for wood flooring, improper selection will directly affect the heating effect, mainly several problems:
First: substrate density, internal bond strength is good;
Second: thickness swelling is less than or equal to 2.5%;
Third: formaldehyde emission to be as low as possible.
Fourth: The thermal conductivity is essential.
Many different types of flooring on the market now, more suitable for solid wood flooring, laminate flooring and other flooring used to heat the floor. Because geothermal floor standard thickness of 6.5 ~ 8.5mm, most of the flooring thickness 6 ~ 9mm, laminate flooring and more for 6 to 8 mm, three parquet 8 ~~ 9mm, better heat transfer performance, and the surface layer of aluminum oxide wear layer, the wear layer is conducive to the rapid diffusion of the heat on the surface.
In winter day, came home do not have to worry about at home was cold, the children play on the ground will freeze, this is better than the air conditioning effect, let us warm into millions of households.